Need help?Do you have a question about the SICK CLV69x and is the answer not in the manual?
General| Interface | RS-232, RS-422, Ethernet |
|---|---|
| Protection Class | IP65 |
| Operating Temperature | +50°C |
| Laser Class | Class 2 |
| Enclosure Rating | IP65 |
| Readable Code Structures | 1D and 2D barcodes |
| Supported Barcode Types | Code 39, Code 128, QR Code, Data Matrix |
| Operating Voltage | 10 V DC ... 30 V DC |
Describes the device's purpose as an opto-electronic ID sensor for bar code identification.
Details incorrect usage scenarios and associated risks, including hazardous areas.
Outlines qualification requirements for personnel handling the device.
Covers general warnings for hazards and operational safety, including laser radiation.
Overview of device views, features, functions, and operating principles.
Explains the fundamental operating principles of the device.
Steps for mounting the device, including preparation and alignment.
Key factors for selecting an optimal mounting location.
Detailed instructions for physically mounting the device.
Guidelines for mounting the device in environments with heavy vibrations or shocks.
Critical safety notes and precautions for electrical installation.
Ensuring system safety via grounding and equipotential bonding.
Detailed pin assignments for cloning plugs and device connections.
Illustrates various connection configurations for the device.
Details on the SOPAS ET software for device adjustment and configuration.
Connecting the device to a PC and starting the SOPAS ET software.
Procedures for final device adjustment for optimal reading performance.
Lists common errors and faults encountered during device operation.
To Next Page
