What to do if SICK CLV620 Barcode Reader has device faults?
If your SICK Barcode Reader isn't working due to device faults, such as hardware or software issues, you should replace or repair the faulty device.
Why SICK Barcode Reader limits not observed?
If your SICK Barcode Reader isn't reading correctly, make sure the device limits, such as reading distance and aperture angle, are being observed.
How to fix data interfaces of the SICK CLV620 Barcode Reader?
If your SICK Barcode Reader isn't reading barcodes, check and correct the wiring of the data interfaces.
What to do if read pulse control is incorrect in SICK CLV620?
To resolve issues with your SICK Barcode Reader, ensure the read pulse control is correct and suitable for the object.
What to do with faulty SICK Barcode Reader?
Dismantle and replace the faulty or damaged devices with new or repaired ones.
General| Scan Rate | 500 scans/s |
|---|---|
| Protection Rating | IP65 |
| Storage Temperature | -20 °C to +70 °C |
| Housing Material | Aluminum |
| Type | Laser barcode scanner |
| Light Source | Laser diode |
| Interfaces | RS-232, Ethernet |
| Operating Temperature | 0 °C to +50 °C |
| Power Supply | 10 to 30 V DC |
Defines the document's scope and content for CLV62x bar code scanners.
Identifies the intended audience for operating instructions.
Details the comprehensive information provided for installation and operation.
Explains symbols and formatting used for emphasis and clarity.
Specifies qualifications required for safe installation, operation, and maintenance.
Describes the bar code scanner's function and application in conveyor systems.
Provides essential safety guidelines for handling and operating the device.
Details laser safety, class 2 operation, and precautions to prevent eye damage.
Explains procedures for safely switching the device on and off.
Covers energy requirements and proper disposal guidelines for the device.
Guides on software installation and initial connection setup.
Details methods for connecting the scanner via RS-232 or Ethernet.
Explains how to conduct a test reading using the scanner and software.
Introduces the scanner's housing types and connection options.
Lists the components provided with the CLV62x Bar Code Scanner.
Details the different available models and their specifications.
Outlines the necessary PC and software requirements for operation.
Provides a summary of the scanner's capabilities and features.
Explains different operational modes, scanning techniques, and data handling.
Describes the LEDs and buttons on the scanner for status and operation.
Outlines the typical steps involved in installing the scanner and accessories.
Lists general requirements, tools, and components needed for installation.
Covers factors for choosing the optimal mounting location for the scanner.
Provides step-by-step instructions for physically mounting the scanner.
Guides on installing connection modules, sensors, and encoders.
Details the procedure for safely removing the scanner from its installation.
Lists the typical sequence for performing electrical installation.
Covers prerequisites and requirements for electrical setup.
Explains wiring diagrams and connection types for the scanner.
Guides on connecting power, serial, CAN, Ethernet, and switching interfaces.
Provides pinout details and wire colors for various cables.
Summarizes the steps for initial setup and configuration.
Introduces the software for scanner configuration and parameter management.
Explains how to connect the PC and scanner for communication.
Guides through the initial setup process with the scanner and software.
Details how to configure scanner parameters using the software.
Explains how to reset the scanner to factory default settings.
Details how to fine-tune the scanner's alignment and performance.
States that the scanner functions maintenance-free.
Provides instructions for cleaning the reading window and housing.
Guides on cleaning external sensors to ensure proper operation.
Advises on checking the incremental encoder for correct function.
Details the procedure for removing and replacing a faulty scanner.
Lists common errors related to installation, configuration, and operation.
Explains how to analyze errors using LEDs and system information.
Describes how to view and interpret error logs and status information.
Provides contact information for technical support and service.
Presents detailed specifications and technical data for the scanner.
Includes diagrams showing reading ranges and characteristic curves.
Shows detailed mechanical dimensions for various scanner models.
Lists the additional information provided in the appendix.
Explains how to configure the scanner using command strings.
Provides a guide for calculating bar code lengths for configuration.
Lists part numbers and variants for scanners and accessories.
Shows dimensional drawings for various mounting accessories.
Lists other relevant documents and manuals.
Defines technical terms and concepts used in the manual.
Includes the official declaration of conformity for the product.
Provides visual examples of different bar code types.
To Next Page
