What to do if SICK CLV620 Barcode Reader has device faults?
If your SICK Barcode Reader isn't working due to device faults, such as hardware or software issues, you should replace or repair the faulty device.
Why SICK Barcode Reader limits not observed?
If your SICK Barcode Reader isn't reading correctly, make sure the device limits, such as reading distance and aperture angle, are being observed.
How to fix data interfaces of the SICK CLV620 Barcode Reader?
If your SICK Barcode Reader isn't reading barcodes, check and correct the wiring of the data interfaces.
What to do if read pulse control is incorrect in SICK CLV620?
To resolve issues with your SICK Barcode Reader, ensure the read pulse control is correct and suitable for the object.
What to do with faulty SICK Barcode Reader?
Dismantle and replace the faulty or damaged devices with new or repaired ones.
General| Scan Rate | 500 scans/s |
|---|---|
| Protection Rating | IP65 |
| Storage Temperature | -20 °C to +70 °C |
| Housing Material | Aluminum |
| Type | Laser barcode scanner |
| Light Source | Laser diode |
| Interfaces | RS-232, Ethernet |
| Operating Temperature | 0 °C to +50 °C |
| Power Supply | 10 to 30 V DC |
To Next Page
