11 Decommissioning
11.1 Disassembly and disposal
Dismantling the device
1. Switch off the supply voltage to the device.
2. Detach all connecting cables from the device.
3. If the device is being replaced, mark its position and alignment on the bracket or
surroundings.
4. Remove the device from the bracket.
5. Unscrew the screws for the cloning plug and remove the cloning plug.
6. Apply protective covering to the cloning plug.
Disposing of the device
Any device which can no longer be used must be disposed of in an environmentally
friendly manner in accordance with the applicable country-specific waste disposal regu‐
lations. As they are categorized as electronic waste, the device must never be disposed
of with household waste.
11.2 Returns
b
Do not dispatch devices to the SICK Service department without consultation.
NOTE
To enable efficient processing and allow us to determine the cause quickly, please
include the following when making a return:
■
Details of the contact person
■
Description of the application
■
Description of the fault that occurred
DECOMMISSIONING 11
8014396/ZMG8/2017-07-04 | SICK O P E R A T I N G I N S T R U C T I O N S | CLV69x
95
Subject to change without notice
To Next Page
Loading...
