Need help?Do you have a question about the SICK CLV640 and is the answer not in the manual?
General| Brand | SICK |
|---|---|
| Model | CLV640 |
| Category | Barcode Reader |
| Language | English |
Specifies the qualifications required for personnel installing, operating, and maintaining the scanner.
Describes the proper application of the CLV640 Bar Code Scanner in conveyor systems.
Outlines general safety guidelines and protective measures for operating the bar code scanner.
Warns about laser radiation hazards and provides safety instructions for eye protection.
Guides users through performing a test reading with the bar code scanner using SOPAS-ET.
Lists the typical steps involved in installing the bar code scanner and its components.
Outlines general requirements and tools needed for preparing the scanner installation.
Lists the main components that need to be ready for the installation process.
Lists accessories that are not included in delivery and must be ordered separately.
Explains how to mount the bar code scanner using various SICK holders or custom solutions.
Describes how to replace the laser warning sign with one in the correct language.
Discusses factors to consider when selecting the optimal installation location for the scanner.
Explains how the scanning line is allocated to the bar code based on scanner version.
Details the relationship between reading distance, aperture angle, and depth of field.
Guides on optimally aligning the scanner for accurate bar code reading.
Provides step-by-step instructions for physically installing the bar code scanner.
Provides an overview of the typical sequence for electrical installation tasks.
Lists general requirements and tools needed for electrical installation.
Illustrates the electrical connections and cables for both standard and Ethernet versions.
Details the electrical connections available on the scanner for different device versions.
Shows the pin assignment for the standard version's D-Sub-HD connector.
Shows the pin assignment for the Ethernet version's M12 connector.
Guides on performing electrical installation, including connector handling and wire cross-sections.
Explains how to connect the power supply to the scanner, voltage requirements.
Details recommended cable lengths for serial data interfaces based on transfer rates.
Provides pin assignments and wire colors for various assembled cables.
Lists pin assignments and wire colors for cables with open ends.
Outlines the steps for starting up, configuring, and checking the bar code scanner.
Introduces the SOPAS-ET software for scanner optimization and configuration.
Provides an overview of the functions offered by the SOPAS-ET software.
Explains how to establish communication between the PC and the scanner.
Details how to connect the PC to the scanner via RS-232 or Ethernet interfaces.
Guides on starting SOPAS-ET and using the scan assistant for configuration.
Explains manual and wizard-based configuration of Ethernet connections.
Guides on configuring serial connection parameters like baud rate.
Explains the initial startup process, including optimization with SOPAS-ET.
Details how to configure all scanner parameters using SOPAS-ET.
Explains how to save configuration changes permanently to the scanner.
Provides instructions for fine-tuning the scanner's alignment and reading performance.
Lists common errors and malfunctions categorized by type: installation, electrical, configuration, and operation.
Explains how to analyze malfunctions by observing LED statuses and system information.
Details how scanner LEDs indicate status, reading reliability, and data traffic.
To Next Page