Operating Instructions Chapter 11
CLV640 Bar Code Scanner
Appendix
8011975/0000/2008-04-14 © SICK AG · Division Auto Ident · Germany · All rights reserved 111
11.4 Ordering information for bar code scanner and accessories
11.4.1 Ordering information for CLV640 Bar Code Scanner
Tab. 11-2: Variants of the CLV640 Bar Code Scanner
11.4.2 Accessories: Mounting devices
Tab. 11-3: In stock accessories: Installation accessories
Order no. Type Scanning method Reading
window
Connection (design)
1042014 CLV640-0000 Line scanner On front Cable with connector
1042015 CLV640-0120 Line scanner On front Connector unit on device
1042016
CLV640-1000
*)
Raster scanner On front Cable with connector
1042017
CLV640-1120
*)
Raster scanner On front Connector unit on device
1042018
CLV640-2000
*)
Line scanner On side Cable with connector
1042019
CLV640-2120
*)
Line scanner On side Connector unit on device
1042020
CLV640-3000
*)
Raster scanner On side Cable with connector
1042021
CLV640-3120
*)
Raster scanner On side Connector unit on device
1042022 CLV640-6000 Line scanner with
oscillating mirror
On side Cable with connector
1042023 CLV640-6120 Line scanner with
oscillating mirror
On side Connector unit on device
*) available from q4 2008
Order no. Description Fig.
2020410 Fixing bracket incl. installation material.
For dimensional drawing, see chapter 11.5.1 Dimensional drawing fixing bracket no.
2020410, page 117
2025526 Quick release clamp incl. installation material.
For dimensional drawing, see chapter 11.5.2 Dimensional drawing of quick release clamp
no. 2025526, page 118
2042800 Fixing Bracket incl. installation material.
For dimensional drawing, see chapter 11.5.3 Dimensional drawing fixing bracket no.
2042800, page 119
2042801 Round rod holders for round rods and tubes with an outer diameter of 12...20 mm (0.47 ...
0.8 in), incl. installation material.
For dimensional drawing, see chapter 11.5.4 Dimensional drawing of round rod holder no.
2042801, page 120
To Next Page
Loading...
Need help?
General
