3. Press the return key to confirm the selected function.
The device executes the function and automatically returns to the read mode after
2 minutes.
4. To abort the function manually (cancel), press the Return key again and hold for
2 seconds.
Bar Graph 0 ... 100%
In “Percentage Evaluation” operating mode, the bar graph continuously displays the last
determined read rate in %, in each case related to 100 readings. The bar graph is deac‐
tivated in standard read mode.
8.2 Operating options
The device can be configured according to application in the following manner:
■
Locally at the device with the SOPAS ET configuration software: Protection of the
parameter set as a configuration file on the PC in SOPAS ET. Access to the device
via AUX interface (USB or Ethernet).
■
As an alternative to the SOPAS ET configuration software, command strings are
available, upon which the operator interface of the configuration software is also
based. These are also for the triggering of device functions (e.g. reading). Docu‐
ments on the commando strings can be obtained from SICK on request.
The SOPAS ET configuration software is used for device diagnostics in case of a fault.
In normal operation, the device operates fully automatically.
OPERATION 8
8014396/ZMG8/2017-07-04 | SICK O P E R A T I N G I N S T R U C T I O N S | CLV69x
89
Subject to change without notice
To Next Page
Loading...
Need help?
General
