SICK PGT-10-Pro

5 Control Elements
No. Description
1 LC display with four lines of 16 characters each
2 “Up” arrow pushbutton
3 Esc pushbutton (jump to the menu level above, if pressed in the main menu the
PGT-10-Pro switches off)
4 Communication LED (lights up green when data is being transmitted from or to the
encoder)
5 Enter pushbutton (confirm an entry or jump to the menu level below)
6 “Down” arrow pushbutton
Arrow pushbuttons and
•
Cycle back and forth in the menu
•
Choose between several parameter values
•
Set parameter values (see “Description of Operation”).
Enter pushbutton:
•
Switch to a sub menu/function
•
Move to the next digit to the right when entering digits
•
Confirm digit entry when the rightmost digit is “active”
Esc pushbutton:
•
Switch to a higher menu level
•
Move to the next digit to the left when entering digits
•
Cancel digit entry if the first digit is “active”
OPERATING INSTRUCTIONS
32
O P E R A T I N G I N S T R U C T I O N S | PGT-10-Pro 8018708/1GQ6/2023-01-17 | SICK
Subject to change without notice
en