Need help?Do you have a question about the SICK PGT-10-Pro and is the answer not in the manual?
Explains warning symbols and their meaning for user safety.
Lists related product information documents with part numbers.
States the product is maintenance-free and not designed for repair.
Provides guidance on proper disposal of the device and batteries.
Lists parameters that can be programmed for incremental and absolute encoders.
Instructions on how to insert and replace batteries, including safety warnings.
Details on how to insert and remove the SD card from the device.
Instructions for connecting the programming tool to the encoder.
Explains how to switch the programming tool on and its auto-off function.
Describes the function of the arrow pushbuttons for navigation and value selection.
Explains the function of the Enter pushbutton for navigation and confirmation.
Details the functions of the Esc pushbutton for menu navigation and cancellation.
Instructions on how to change the menu language of the programming tool.
Guides on how to program parameters to an encoder.
Instructions for cloning parameter values between encoders.
Process for programming multiple different encoder types.
Instructions for preparing to save parameter sets onto an SD card.
Steps to program encoders using parameter sets stored on an SD card.
Guides on assigning user rights and password protection for the device.
Instructions on how to perform a firmware update on the device.
Illustrates and describes the spring terminal block connections for encoders.
Details cable assignments for incremental encoders.
Details cable assignments for absolute encoders.
Lists adapter cables for different encoder types.
Details programmable parameters specific to incremental encoders.
Details programmable parameters specific to absolute encoders.
Information on obtaining product conformity declarations and certificates.
To Next Page
General