SICK PGT-10-Pro

Parameter/Menu Item
AFS60B-xxPxxxxxxx AFS60A-xxPxxxxxxx
AFM60B-xxRxxxxxxx AFM60A-xxRxxxxxxx
AFM60B-xxSxxxxxxx AFM60A-xxSxxxxxxx AFM60B-xxPxxxxxxx AFM60A-xxPxxxxxxx
AHS36A-xxPxxxxxxx AHM36A-xxPxxxxxxx
Description
Position error bit
Set position error bit
- - - Fixed
Directly added
Defines the position of the error
bit. Choose between fixed or directly
added (the error bit is transmitted
immediately after the last position
bit).
Preset position
Set preset position
X X X X X Assigns the entered preset position
to the current shaft position.
SSI mode
Set SSI mode
- - - Synchronous
Asynchronous
Defines whether positions are
formed regardless of the master
clock (asynchronous) or synchro‐
nously to the master clock.
TTL/HTL interface
Set electrical interface
- X - - - Defines the output interface for the
incremental signals.
Device in delivery state
Reset to factory settings?
X X X X X Resets all parameters to the factory
settings of the encoder.
11 General Menu Items
NOTE
Availability of the individual menu items depends on the connected encoder type.
OPERATING INSTRUCTIONS
46
O P E R A T I N G I N S T R U C T I O N S | PGT-10-Pro 8018708/1GQ6/2023-01-17 | SICK
Subject to change without notice
en