SICK PGT-10-Pro - Assigning User Rights

6.7 Assigning User Rights
Preparation
•
Call up the Setup menu.
•
Activate PGT-10-Pro password protection using the Set Password Protection func‐
tion and enter a password.
NOTE
Password protection is only activated for the Setup menu. Available functions are
limited when user rights are assigned. User rights can also be set without a password.
Assigning User Rights
•
Call up the Setup menu.
•
Determine user rights using the Set User Rights function in accordance with the
following table:
Setting Description
all functions
(absolute/ incremental)
Unrestricted access to all functions of the PGT- 10-Pro.
Resolution
El. Interface
Zero Pulse Pos.
(incremental)
Access to adjustments for resolution, electrical interface and zero
position only.
Zero Pulse Pos. Only
(incremental)
Access to “Set zero pulse position” only.
Preset Position Only
(absolute)
Access to “Set preset position” only.
Program from SD-Card
(absolute/ incremental)
Access to encoder programming from SD card and read functions
only.
Read Only
(absolute/ incremental)
Access to read functions only.
NOTE
To remove access restrictions, the all functions setting must be activated using the Set
User Rights function.
OPERATING INSTRUCTIONS
38
O P E R A T I N G I N S T R U C T I O N S | PGT-10-Pro 8018708/1GQ6/2023-01-17 | SICK
Subject to change without notice
en