SICK PGT-10-Pro

6.8 Carrying Out Firmware Updates
Preparation
•
Download the latest firmware for the PGT-10-Pro from www.sick.com.
•
Save the file on an SD card in the root directory.
•
Insert the SD card into the PGT-10-Pro.
NOTE
Current firmware updates can be found on www.sick.com. To find the relevant updates,
please enter the seven-digit part number for the PGT-10-Pro directly in the “Search”
field on the homepage. Click on the relevant search result and you will be taken to all
the information and files for your device.
Performing an Update
•
Call up the Setup menu.
•
Activate the Firmware Update function and select the file from the SD card. The
update will be carried out.
•
Wait until the update is complete.
CAUTION
Only carry out a firmware update with fresh batteries inserted to ensure the voltage
supply lasts throughout the update process. If the batteries are removed during the
update or do not supply enough voltage, this may cause damage to the programming
tool.
OPERATING INSTRUCTIONS
8018708/1GQ6/2023-01-17 | SICK O P E R A T I N G I N S T R U C T I O N S | PGT-10-Pro
39
Subject to change without notice
en