Product feature/func‐
tion
Characteristic
Transponder Process‐
ing
•
Device supports all standard passive transponders that are com‐
patible with ISO/IEC-15693. Recommended data media, see "Sup‐
ported HF chips (IC)", page 20
•
Evaluation of a transponder per reading process
1)
•
Reading, writing, and multiple overwriting of the data on the trans‐
ponders, depending on the application
•
Within a process chain, the device supplying the data is a partial
component for the complete visualization of data
Data processing
•
Via PLC
Data communication IO-Link interface (IO-Link V1.1.0 according to standard IEC61131-9)
•
For data exchange with the PLC
Electrical Interfaces
•
IO-Link port class A
•
IO-Link mode: 1 digital output
•
SIO mode: 2 digital outputs
•
Voltage supply via IO-Link
Connectivity (Design)
•
1 male connector, M12, 4-pin, A-coded.
1)
No anti-collision methodology
3.2.4.1 Supported HF chips (IC)
The device supports the following HF chips (IC):
Manufac‐
turer
Type IC manu‐
facturer
code
IC refer‐
ence
Number
of blocks
Block size
(byte)
Scope of
user mem‐
ory (bit)
NXP ICODE SLIX 04 01 28 4 896
NXP ICODE SLIX 2 04 01 79 4 2528
NXP ICODE SLIX-S 04 02 40 4 1280
NXP ICODE SLIX-L 04 03 8 4 256
TI Tag-it HF-I plus
1)
07 8B 64 4 2048
Fujitsu MB89R118 08 84/85 250 8 16000
1)
This transponder can only be read (UID & user memory)
3 PRODUCT DESCRIPTION
20
O P E R A T I N G I N S T R U C T I O N S | RFH5xx 8025309/1KDE/2023-12-19 | SICK
Subject to change without notice
To Next Page
Loading...