Technical Information Chapter 3
RFU63x
Mounting
8014335/YUO7/2016-04-04 © SICK AG · Germany · All rights reserved · Subject to change without notice 9
3 Mounting
3.1 Notes on mounting
RFU630-13101 UL-certified: Install the device only inside of buildings. The device is not
suitable for outdoor use.
The RFU630 should be attached as free from shock and vibration as possible.
If the external antenna or the RFU630 with an internal antenna is mounted in front of
the front metal surfaces, observe an angle of approx. 10°.
Use one of the optional SICK mounting sets 1 to 4, also in combination if required
depending on the application. For mounting samples, regarding the RFU630-131xx ver-
sion serie, see the following pages.
To Next Page
Loading...
