Need help?Do you have a question about the SICK S30A-7111CP and is the answer not in the manual?
General| Brand | SICK |
|---|---|
| Model | S30A-7111CP |
| Category | Security Sensors |
| Language | English |
The S3000 PROFINET IO/IO-OF safety laser scanner protects persons and plant in stationary applications, e.g., for access or hazardous area protection.
This addendum must be made available to the operator along with the original operating instructions. Operators require instruction by qualified personnel and must read and follow both documents.
Covers reset signals, control signals for switching monitoring cases, stand-by, and initialising functions, including signal logic states.
Covers electrical connections using supply connector and RJ-45/SCRJ sockets, including voltage supply, network connections, and local configuration.
Details how to configure PROFINET IO, including reading the GSDML file and setting up the device name and IP address.
Explains how to configure PROFIsafe parameters like SIL, source/destination addresses, and watchdog time.
Describes the configuration process using the CDS software via local connection or network after PROFINET configuration.
To Next Page