Need help?Do you have a question about the SICK S3000 PROFINET IO Series and is the answer not in the manual?
General| Interfaces | PROFINET IO |
|---|---|
| Protection class | IP65 |
| Safety integrity level | SIL2 (IEC 61508) |
| Operating temperature | 0 °C ... +50 °C |
| Supply voltage | 24 V DC |
| Performance level | PL d |
| Type | Laser scanner |
| Protective field range | 0.1 m to 3 m |
Describes the intended use of the safety laser scanner for protecting persons and plant.
Provides essential safety guidelines and protective measures for operating the safety laser scanner.
Highlights the unique characteristics and functionalities of the S3000 PROFINET IO/IO-OF safety laser scanner.
Explains how the PROFINET IO device and PROFIsafe communication function.
Details the various input signals for controlling and monitoring the safety laser scanner.
Details the function and requirements of reset signals for the safety laser scanner.
Explains the use of control inputs for switching between different monitoring cases.
Describes the stand-by operational mode of the safety laser scanner.
Explains the process for initializing the safety laser scanner after errors.
Describes the electrical connection of the S3000 PROFINET IO/IO-OF using supply and network connectors.
Details how to connect the power supply to the safety laser scanner.
Explains the network connection using RJ-45 push-pull plugs.
Details the network connection using SCRJ push-pull plugs for optical fiber.
Describes the method for local configuration and diagnostics via RS-232.
Guides on configuring the PROFINET IO communication for the safety laser scanner.
Details how to add the GSDML file to the hardware catalogue for PROFINET IO configuration.
Explains how to set up device names and IP addresses for PROFINET IO configuration.
Outlines the steps for configuring the PROFIsafe safety protocol for the device.
Details how to set the PROFIsafe address for correct communication with the FPLC.
Explains the passive state and the process of reintegrating the safety laser scanner.
Covers the overall configuration of the S3000 PROFINET IO/IO-OF using CDS and network connections.
Explains the meaning of LEDs and the 7-segment display for device status indication.
Details the specific functions of the LEDs on the safety laser scanner.
Describes the information conveyed by the 7-segment display for diagnostics.
Describes the use of CDS software for detailed diagnostics via network or locally.
Covers how alarms are output and handled by the safety laser scanner.
Explains the I&M function for device identification and maintenance data.
Details the input data structure for the Advanced version of the safety laser scanner.
Describes the input bits and their meanings for the Advanced version.
Describes the output bits and their meanings for the Advanced version.
Details the input data structure for the Professional version of the safety laser scanner.
Describes the input bits and their meanings for the Professional version.
Describes the output bits and their meanings for the Professional version.
Lists and explains various diagnostic messages generated by PROFINET communication.
Details the response times for protective field infringement and reaction to input information.
Provides a summary of electrical, optical, and general data for the safety laser scanner.
Lists the communication and network services supported by the device.
Provides the physical dimensions and mounting references for the device.
Lists the components included with the S3000 PROFINET IO/IO-OF.
Details the different system configurations and part numbers available for ordering.
Lists available accessories and spare parts for the safety laser scanner.
Presents an excerpt of the EU declaration of conformity for the product.
Provides a reference list of all tables included in the document.
Provides a reference list of all illustrations included in the document.
To Next Page