SICK S3000 PROFINET IO Series User Manual

Addendum Operating Instructions Chapter 1
S3000 PROFINET IO/IOOF
8013291/YY95/2016-02-05 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 5
Subject to change without notice
About this document
1 About this document
T
his document is an original document.
This addendum is applicable for the S3000 PROFINET IO and S3000 PROFINET IO8OF safe-
ty laser scanners, in the following summarized as S3000 PROFINET IO/IO8OF. As far as the
connection variants differ, the respective product variant is named.
This addendum is applicable to the S3000 PROFINET IO/IO8OF safety laser scanner with
one of the following entries on the type label in the field Operating Instructions:
 8013289
 8013289/TL59
 8013289/US26
 8013289/YAX9
 8013289/YKY7
 8013289/YY95
This document is part of SICK part number 8013289 (addendum operating instructions
“Safety Laser Scanner S3000 PROFINET IO and S3000 PROFINET IO8OF” in all available
languages).
This addendum only applies in conjunction with the original operating instructions
“S3000 Safety Laser Scanner” (SICK part number 8009791).
If not otherwise revised in this document, the information in the original operating
instructions applies, which relate to the S3000 Advanced or Professional safety laser
scanner.
For the configuration and diagnostics of these devices you require CDS (Configuration &
Diagnostic Software) version 3.6.4 or higher.
Note

SICK S3000 PROFINET IO Series Specifications

General

Brand	SICK
Model	S3000 PROFINET IO Series
Category	Security Sensors
Language	English