SICK S30A-7111CP

Chapter 6 Addendum Operating Instructions
S3000 PROFINET IO/IOOF
18 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8013291/YY95/2016-02-05
Subject to change without notice
Configuration
6.2 Configuration PROFIsafe

In slots in the network engineering tool, choose the command Object properties on the
context menu.
 On the PROFIsafe tab configure the parameters for the S3000 PROFINET IO/IO8OF.
See Tab. 5 for the parameters to be entered.
Fig.
10
:
Configuration
PROFIsafe, step 1
Note
Fig.
11
:
Configuration
PROFIsafe, step 2