2 Correct use
The SIG200 (referred to as "module" in the following) is an IO-Link Master for connect‐
ing IO-Link devices, standard input signals or standard output signals.
Correct use requires that the device is used industrially indoors without any specific cli‐
matic and atmospheric requirements. Operation of the device in accordance with its
designated use and the degree of protection IP67 are only guaranteed if open male and
female connectors are closed using screw plugs.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
CORRECT USE 2
8017853/2019-06-06 | SICK O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200
5
Subject to change without notice
To Next Page
Loading...
