3 Product description
3.1 Product description
The IO-Link-Master SIG200 is an intelligent gateway to connect IO-Link devices, input
and/or output signals for signal integration via Profinet to a PLC or via REST API to a
network. It was designed for use in industrial environments that require up to an IP67
enclosure rating. There are four IO-Link channels, each on a dedicated Port Type A M12
socket.
In addition, the SIG200 has a powerful user interface that can be accessed either via
USB using SICK's SOPAS ET software or via Ethernet and a web browser of choice. For
Ethernet access the default IP Address is 192.168.0.1. An embedded IODD interpreter
allows the user to easily configure both the SIG200 and connected IO-Link devices by
simply using the IODD file(s). The user interface also has a logic editor to create sensor/
actuator systems based on the information they provide.
3.2 Operating and status indicators
POWER
SF
BF
C/DI/DO1
DI
C/DI/DO1
DI
C/DI/DO1
DI
C/DI/DO
DI
LINK
ACT2
LINK
ACT1
SF
POWER
BF
/DO
DI
/DO
DI
/DO
DI
/DO
DI
LINK
ACT2
LINK
ACT1
SIG200
POWER CONFIG
S1
S2
S3
S4
P2
P1
1
2
â
á
8
9
ß
à
3
4
5
6
7
Figure 1: Dimensional drawing
1
POWER IN
2
IO-Link Port S1
3
IO-Link Port S2
4
IO-Link Port S3
5
IO-Link Port S4
6
Ethernet Port P2
7
Ethernet Port P1
8
DI: LED for pin 2
3 PRODUCT DESCRIPTION
6
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8017853/2019-06-06 | SICK
Subject to change without notice
To Next Page
Loading...
