Sicma S.p.A.
Miglianico (CH)
page 18
TMX
2
, SL
2
and TE
2
shredders are provided with
only two side shift positions. To adjust their side
shift (picture 10):
- Screw out and extract screws A.
- Disassemble frame B connecting the elevator
and place it on the shredder frame through
holes C.
- After adjustment insert screws A back and
tighten strongly.
Work height and side shift adjustments shall be made only on
working ground and only after having stopped the engine,
disengaged the power takeoff and pulled the parking brake.
If necessary, lift the machine from the ground but, in order to
avoid risks for people, place it on rests thus preventing any
injuries that might be caused by its sudden fall.
Picture
10
traversing model
2
fixed model
Picture
10
To Next Page
Loading...
