AC MUM0040 rev. 11 - 8 -
MR12 - MR12C
EXCLUSION OF POWER SOURCES
Before carrying out any cleaning, lubricaon and/or maintenance
work, maintenance personnel must put the winch out of service by
disconnecng the power supply and must wait for the heated parts of
the motor and the winch to reach ambient temperature.
WARNING
Do not lean and/or sit on the winch, either when it is in or out of service.
WARNING
Do not approach or lean against the rotang parts (ywheel or
pulley painted yellow).
Do not deposit or place any objects or containers of liquids
etc. on the hoist and especially on electrical parts.