SICUREZZA COMPAGNIE RIUNITE
3.1 - HARDHAT DISASSEMBLY
WARNING
It is recommended to read through each single paragraph before proceeding with the
disassembly operations.
To proceed with disassembly, place the hardhat upside down on an uncluttered surface in
order not to lose any components.
During the disassembly procedures, position all the parts removed in an orderly way.
- Pull the strap (1) out of the adjusters (2)
and out of the anti-creep system.
- Release the rear part (3) of the protective mesh (4).
To Next Page
Loading...
Need help?
General