Installation & User Manual, Radio Remote rev 1_0_4 Page 12
Transmitter LED operation and alarm indication
State LED status Alarm status
Transmitter ON The yellow LED’s
blink each second
No sound
Buttons activated The yellow LED’s
blink fast
No sound
Pairing mode All LED’s on No sound
Connection lost Red LED is blink-
ing once each
second
3 beeps from the
buzzer each second
Low battery Red LED blink One beep
State LED status
Power on the receiver and no transmitter connected Green LED is toggling
Power on the receiver and at least one transmitter
connected
Green LED lit
No power to the receiver. Both LED is o
Receiver in pairing mode Both the red and
green LED blinking
Receiver LED indicator
To Next Page
Loading...
Need help?
General
