Side-Power RC-20E User Manual

Installation & User Manual, Radio Remote rev 1_0_4 Page 9
How to use a bow/stern windlass
1. Turn the main power switch for the windlass on. Turn on main switch so the receiver has
power.
2. Turn on the transmitter by pushing the transmitter’s two “ON” buttons. The remote system is
now activated and then turns o󰀨 automatically appr. 4 min. after the last usage.
3. Please consult your windlass manual for use and precautions.
Remote Control Deactivation
Push the transmitter’s “OFF” button for two seconds (the remote control deactivates automati-
cally after approx. 4 minutes after the last usage).
Remote control “ON” Windlass 2
Remote control “OFF”
Auto-OFF
appr. 4 min.
Down
Up
Hold for
2 seconds
Windlass 1
Down
Up
RC-22E

Side-Power RC-20E Specifications

General

Brand	Side-Power
Model	RC-20E
Category	Remote Control
Language	English