Side-Power SH-360 User Manual

2
614 6
2 2 019
-
SH 360
DECLARATION OF CONFORMITY
Sleipner Motor AS
P.O. Box 519, Arne Svendsensgt. 6-8
N-1612 Fredrikstad, Norway
Declare that this product with accompanying standard control systems complies with
the essential health and safety requirements according to:
DIRECTIVE 2013/53/EU
DIRECTIVE 2014/30/EU
DIRECTIVE 2014/35/EU
MC_0020
Installation instructions
Planning Considerations and Precautions................................. 3
Thruster Measurements ........................................................... 4
Thruster Specications ............................................................. 5
Technical Specications ........................................................... 5
Positioning of the tunnel/ thruster .............................................. 6
Tunnel Length ............................................................................ 7
Tunnel Installation in Sailboats .................................................. 8
Water Deection ........................................................................ 9
Tunnel ends ............................................................................. 10
Tunnel Installation ............................................................ 11 - 12
Stern Tunnel Installation .......................................................... 13
Thruster installation
Hydraulic Thruster Installation Considerations and Precautions..
................................................................................................. 14
Technical Specications .......................................................... 15
Technical Requirements / Hydraulic hose connections to motor ..
................................................................................................. 16
Gear Leg & Motor Bracket Installation .................................... 17
Propeller Installation .................................................................18
Motor Installation ......................................................................19
Oil Tank Installation ................................................................. 20
S-link Planning & Precautions ................................................ 21
Control Panel Installation..........................................................22
Checklist for Hydraulic Thrusters ............................................. 23
Spare Parts............................................................................. 24
Warranty statement ............................................................... 24
Contents
EN
It is the installers responsibility
When installing Side-Power equipment to follow the outlined regulations/ classi cation rules (electrical/ mechanical) according to
international or special national regulations. Instructions in this guide cannot be guaranteed to comply with global electric/ mechanic
regulations/ classi cation rules.
It is the installers responsibility
To follow all health and safety laws in accordance with their local outlined regulations/ classi cation rules.
Before installation, it is important that the installer reads this guide to ensure necessary acquaintance with this product.
The recommendations made in this manual are guidelines ONLY, and Sleipner Motor AS (Side-Power) strongly recommend that
before installation, advice is obtained from a naval architect familiar with the particular vessel and regulations/ classi cations.
This manual is intended to support educated/ experienced staff and is therefore not suffi cient in all details for professional
installation. (NB: These instructions are only general instruction. If you are not skilled to do this work, please contact professional
installers for assistance.)
All electrical work must be done by a licensed professional.
IMPORTANT
Faulty installation of the tunnel, thruster or panel will render all warranty given by Sleipner Motor AS void.
MC_0038

Side-Power SH-360 Specifications

General

Brand	Side-Power
Model	SH-360
Category	Marine Equipment
Language	English