Sideshift SS Series - Required Tools

SIDESHIFT INSTALLATION GUIDE V2.7
11
Required Tools
• Cordless DC drill
• Water-proof angle drill (optional, for in-water installations)
• Heat gun
•
3
/
8
” drive torque wrench
• #2 Phillips screwdriver
• Wire stripper
• Wire crimper
•
7
/
8
” socket
• SAE wrench set 3/8” to 3/4”
• Pliers
• 1½” joist drill bit
• ½” 13 mm drill bit
• Drill bits up to ½”
•
3
/
16
” hex socket driver
• Caulking gun
• Hacksaw
• 2 ½” hole saw