5
4. Installation and Preparing for use
Your Inspiration Cot comes fully assembled and ready for use. Simply remove any
packaging and connect the mains cable to an appropriate mains socket outlet.
Note: The cot must only be used with a mains supply of 240V, 50Hz. If this
product is to be used outside of the UK seek professional advice as to the
compatibility of this product with the mains power supply type.
5. Operating the Inspiration Cot
General Safety
When the cot is operated, ensure that ancillary equipment and general furniture is not
in the way.
Check that all electrical cables are free from tension and are positioned so as to avoid
both patient and carer accidents.
Ensure that the mattress used is of correct size and type. A range of dynamic and static
pressure relieving/reducing mattresses are available from Sidhil Ltd.
Ensure that the patient is positioned appropriately within the cot and ensure that they
are aware in advance of each action taking place.
The cot’s braking system should always be engaged when not in motion.
Ensure these user instructions are kept in a safe place at all times. Additional copies are
available from Sidhil Ltd and via the internet at www.sidhil.com.
WARNING
Ensure that the mains cable is not in tension
when connected to the power supply.
Ensure that all cables and handsets are clear of
any moving parts on the cot to prevent them from becoming
tangled or damaged.
To Next Page
Loading...
