SIEB & MEYER CNC 8.00 Series User Manual

Fig. 8: Parameter file
9.
Click on "System ÿ File and directory setting ÿ Info and startup files". The
following window opens:
Fig. 9: Select startup file
10. Click on the button on the on the right to the field "Startup file" [A]. The file browser
of the operating software opens. Select the provided file "STARTUP.TXT". After
you have selected the file appears in the field "Startup file".
W
Installation and Setup
CNC 8x.00 - Demo Kit 13
2

SIEB & MEYER CNC 8.00 Series Specifications

General

Brand	SIEB & MEYER
Model	CNC 8.00 Series
Category	Motherboard
Language	English