15
Preview
The Preview feature lets you view information associated with
any line configured on your phone. You can see the following
information when the phone is idle or active on a call:
• the identity of the caller on a line configured to ring on your
phone (including recalling lines from hold, park, system
hold, and transfer.)
• the identity of the caller for the line you are currently using.
• the identity of a party or a camped-on party on your
currently active line.
• the information about a line on hold.
To activate the Preview feature,
1. Press the Preview key. The Preview status light turns on.
2. Press a line key to view information.
Line information is displayed for 8 seconds. If you take no
further action, the display reverts to the previous content. The
Preview key remains active so that you can continue to
display information about other lines.
To deactivate the Preview feature,
You can do one of the following:
• Press the Preview key. The status light turns off.
• Press any key except the following dial pad keys: Mute,
Volume, Time, 0 through 9, *, or #.
• Make a call using the speakerphone.
• Place the handset on-hook if it is off-hook.
• Place the handset off-hook if it is on-hook.
To answer a call on a Preview line,
If your phone is idle, go off-hook and begin speaking while
the preview information is displayed.
If you are active on a call, turn the Preview key off before
answering the call.
To Next Page
Loading...
Need help?
General
