Siemens 120 Series User Manual

16
Repertory Dialing (Repdial) Keys
This feature lets you set up each repdial (R-) key on your
faceplate for one-touch dialing of an extension, outside number,
feature access code, or combination of numbers and feature
access codes.
To set up a repdial key,
1. Press the Program key.
2. Press the repdial (R-) key that you want to use.
3.
Enter the dialing sequence you want to assign to
the key.
4.
Press the Program key. On your faceplate, label the
key with the name of the feature or person that it
dials.
To dial using a repdial key,
Press the repdial (R-) key.
PROGRAM
R-
PROGRAM
R-

Siemens 120 Series Specifications

General

Battery Life	Up to 10 hours talk time
Standby Time	Up to 100 hours
Caller ID	Yes
Frequency	DECT 6.0
Range	Up to 300 meters outdoors