3
Line Keys
Your ROLMphone telephone has a separate line key for every
extension that appears on your phone. You use the line keys to
answer and place calls.
Status Lights
The red status lights next to the line keys tell you what is
happening on those lines. A line key status light may turn on
steadily, blink, or flash at different rates to signal the status of
that line.
Table 1. Line Key Status Light Flash Rates
Feature Keys and Access Codes
You can press feature keys to gain access to system features
such as Hold, Transfer, Mailbox, and Program. Since your
phone has already been assigned a set of feature keys, it may not
have some of the feature keys described here. However, you
may still use any feature available on your system and permitted
by your class of service by dialing its feature access code, if it
has one. This guide explains the basic steps for using many
features, including the default feature access codes (which your
system administrator may have configured differently).
Flash Rate Line Status
Off Available
On steady In use
Winking In use by someone else
Blinking (faster) Ringing
Flashing (fastest) On hold
To Next Page
Loading...
Need help?
General
