Step-by-Step
Conducting calls – the basic functions
2
Displaying the connection quality
The strength of the incoming signal is displayed by the
"receive field strength" icon in on or message status:
The radio range is different indoors and outdoors
(Æ page 89). Please consult your system administrator
in the event of range problems.
First seize the line, then dial
c
or u Press the Talk or Speakerphone key.
o Enter the required phone number. The user will be
called.
Typing errors cannot be corrected. If you make a typing
error: press the On-hook key.
p The user answers. Conduct the call.
Dial first, then seize the line
o and poss. W Enter the required phone no. and correct individual char-
acters as necessary using the "Delete" Display key.
possibly
© The following functions are available while you are en-
tering the phone number:
• "Insert Pause" (Insert a dial pause, e.g. between the
prefix and phone number or when checking a mail-
box.)
• "Insert TBR" (irrelevant)
• "Copy to Directory" (save the phone number in the
handset’s redial list)
|
No receive field strength
Ò
Low receive field strength
Ñ
50% receive field strength
Ð
100% receive field strength
Note:
This dialling preparation function is also available
with number redial and dialling using the hand-
set redial list.
To Next Page
Loading...
