Conducting calls – enhanced functions
43
Step-by-Step
Deactivating call forwarding to a "trunk"
c Press the Talk key.
Call the system menu.
> < [Select and confirm the menu item.
> < [Select and confirm the menu item.
o Follow the user guidance system from this point on-
wards (enter a multiple subscriber number or DID and
forwarding type).
[ Confirm your entries.
a Press the On-hook key to end the process.
Using night service
In night service mode, for example during lunch breaks
or after office hours, all external calls are forwarded to a
particular internal telephone (night station) The night
station can be defined by the service engineer (= stand-
ard night service) or by you (= temporary night service).
When night service is active, the night station assumes
the function of the intercept station.
Activating night service
c Press the Talk key.
Call the system menu.
> < [Select and confirm the menu item.
either:
> < [Select and confirm the menu item.
"Standard night service" is configured.
or:
o Enter an internal phone number.
Save the settings.
"Temporary night service" is configured.
a Press the On-hook key to end the process.
Menu
Service?
Forward by Network
OFF?
Menu
Night answer on?
*=default?
Save
To Next Page