Siemens 3000 - Page 47

Conducting calls – enhanced functions
39
Step-by-Step
> < [
Select and confirm the menu item.
> < [Select and confirm the menu item.
o Enter the internal phone number for the door opener.
The door is opened.
a Press the On-hook key to end the process.
Activating the door release
This function only works if it has been configured by the
service engineer.
c Press the Talk key.
Call the system menu.
> < [Select and confirm the menu item.
> < [Select and confirm the menu item.
o Follow the user guidance system from this point on-
wards. Enter the internal phone number of the door
opener, as well as the code and type of door release:
• 1=Enable with call,
• 2=Enable without call,
• 3=Change password.
[ Confirm your entries.
a Press the On-hook key to end the process.
Deactivating the door release
c Press the Talk key.
Call the system menu.
> < [Select and confirm the menu item.
> < [Select and confirm the menu item.
a Press the On-hook key to end the process.
Service?
*
61=Open door?
Menu
Service?
*
89=Door release
ON?
Note:
Standard code 00000. To change the code, con-
firm option "3=Change Password". Follow the
user guidance system.
Menu
Service?
*
89=Door release
OFF?