A
anthony74Aug 29, 2025
What to do if Siemens UPS reports a defective battery?
- ZZachary WalshAug 30, 2025
If your Siemens UPS indicates a defective battery, check the fuse and the battery voltages.
To Next PageTo Next PageWhat to do if Siemens UPS reports a defective battery?
If your Siemens UPS indicates a defective battery, check the fuse and the battery voltages.
What does unknown parameter mean on Siemens UPS?
Attempting to set a parameter that is not known by Siemens DC UPS.
What does insufficient charge level mean on Siemens UPS?
The battery charge level is presently too low on your Siemens UPS to reach the set buffer capacity.
What does write error mean on Siemens UPS?
Cannot write to flash on your Siemens UPS - hardware may be defective.
What does wrong battery number mean on Siemens UPS?
Attempting to retrieve data about a battery which does not exist or is not connected to your Siemens UPS.
What does EEPROM write error mean on Siemens UPS?
The Siemens UPS device is defective.
Why Siemens UPS input voltage is too high?
Siemens DC UPS is not operational.
What does battery temperature low mean on Siemens UPS?
The Siemens UPS battery temperature is too low, resulting in reduced output current.
What does battery temperature high mean on Siemens UPS?
The Siemens UPS battery temperature is too high, which will shorten the battery life.
How to fix Siemens UPS device temperature too low?
If the Siemens UPS reports a critically low device temperature, ensure a higher ambient temperature.
General| Input Voltage Range | 85-264 V AC |
|---|---|
| Output Voltage | 24 V DC |
| Efficiency | up to 93% |
| Protection Class | IP20 |
| Operating Temperature Range | -25 to +70 °C |
Provides a general description of the DC-UPS modules and their capabilities.
Details crucial safety precautions for operating electrical devices and handling them properly.
Describes the SITOP UPS1600 and SITOP UPS1100 modules, their features, and integration.
Details the SITOP UPS1600 DC-UPS modules, their design, and mounting requirements.
Details the SITOP UPS1100 battery modules, their components, and communication with the UPS1600.
Explains how to integrate, parameterize, and diagnose SITOP UPS1600 using SIMATIC STEP 7 in TIA Portal.
Details error codes, severity, and help text for hardware faults and internal errors.
Provides instructions for mounting and removing the SITOP UPS1600 devices on mounting rails.
Specifies protection class, degree of protection, and test voltage requirements for the devices.
