Siemens 6ES7513-1AM03-0AB0 - Front View of the CPU Without Front Panel and View from below

3.5.2 Front view of the CPU without front panel and view from below
The following figure shows the operator controls and connection elements of the
CPU1513-1PN.






① LEDs for the current operating mode and diagnostic status of the CPU
② Display
③ MAC address
④ LED displays for the 2 ports of the PROFINET interface X1
⑤ Operating modes with "STOP ACTIVE" LED
⑥ Connector for power supply
Figure 3-4View of the CPU1513-1PN (without front panel) – front
NOTE
Removing the display
Only remove the display if it is faulty.
You can find information on removing and replacing displays in the S7‑1500, ET200MP
system manual (https://support.industry.siemens.com/cs/ww/en/view/59191792).
27
Product overview
3.5 Operating and display elements
CPU 1513-1 PN (6ES7513-1AM03-0AB0)
Equipment Manual, 11/2022, A5E40881673-AC