To Next PageTo Next Page
Need help?Do you have a question about the Siemens ULTRAMAT 6 Series and is the answer not in the manual?
General| Measurement Principle | Non-dispersive infrared (NDIR) |
|---|---|
| Gas Components | CO, CO2, CH4, NO, SO2, NH3 |
| Operating Temperature | 0°C to +45°C |
| Power Supply | 100 to 240 V AC |
| Communication Interfaces | Ethernet |
Details the various models and versions of Series 6 and ULTRAMAT 23 analyzers covered.
Defines the intended applications and correct usage guidelines for the product.
Outlines the necessary qualifications and training for operating the device safely.
Lists EU directives applicable to the product, ensuring compliance and safety standards.
Discusses Siemens' cybersecurity approach and customer responsibilities for secure operation.
General safety guidelines, warnings for hot surfaces, voltage, and proper handling.
Specific safety instructions and requirements for operating analyzers in hazardous environments.
Safety considerations for specific gas mixtures like H2/O2 and explosion hazards.
General safety precautions and warnings related to assembly and installation.
Guidelines for selecting a suitable installation location, considering environmental factors.
Specific installation requirements and safety measures for devices in hazardous zones.
Covers electrical safety, hazardous voltage, and proper grounding during connection.
Details power supply connections, cable specifications, and circuit breaker requirements.
Guidelines for preparing sample gas and connecting toxic/corrosive gases.
Visual representations of how to connect various ULTRAMAT 23 and CALOMAT 6E units.
Safety warnings for commissioning, including hazardous voltage and flammable gases.
Overview of the commissioning process, emphasizing familiarity with manuals and safety.
Procedure for performing a leak test on the sample gas path before or after maintenance.
Safety precautions for maintenance, including hot/toxic media and unauthorized repairs.
Specific warnings and precautions regarding chemical burns from sensors (O2, H2S).
Step-by-step instructions for safely replacing fuses in the device.
Detailed technical data, electrical, climatic, and gas inlet conditions for ULTRAMAT 23.
General technical specifications applicable to Series 6 analyzers.
Technical details for ULTRAMAT 6E and ULTRAMAT channel in ULTRAMAT/OXYMAT 6E.
Technical data for the CALOMAT 6E analyzer, including enclosure and gas path.
Procedures for safely shutting down and relocating the analyzer.
Guidelines for environmentally friendly disposal of the analyzer as electronic waste.
Information on obtaining technical assistance and support resources.
Precautions and guidelines for handling electrostatic sensitive devices.
Glossary of technical terms and abbreviations used in the manual.
