Siemens ULTRAMAT 6 Series - Technical Specifications OXYMAT 6 E, OXYMAT Channel in OXYMAT;ULTRAMAT 6 E and OXYMAT 61

Parts in gas path wetted by sample gas
 Sample chamber
• Body
• Lining
• Gaskets (O-rings)
• Window

Alu
Alu or Ta
FKM or FFKM
CaF
2
, adhesive E353
Special applications  
Pipe gas path Gas feedthrough Ti or stainless steel1.4571 or Hastelloy C22
 Pipe Ti or stainless steel1.4571 or Hastelloy C22
 Sample chamber
• Body
• Lining
• Gaskets (O-rings)
• Window

Ti or stainless steel1.4571 or Hastelloy C22
Ta or Alu
Material according to speci󹪝cation
CaF
2
; without adhesive
Further designs upon request
Options  
Flowmeter Measurement pipe Duran glass
 Variable area Duran glass
 Suspension boundary PTFE
 Angle pieces FKM
Pressure switch sample gas Diaphragm FKM
 Enclosure PA 6.3 T
7.4 Technical speci󹪝cations OXYMAT 6E, OXYMAT channel in
OXYMAT/ULTRAMAT 6E and OXYMAT 61
Enclosure
Weight Approx. 13kg
Dimensions 483 mm x 385mm x 172 mm (W x D x H)
Electrical characteristics
Power consumption (analyzer) Approx. 45VA
Fuse ratings
• 100 ... 120V
• 200 ... 240V
1T/250
0.63T/250
Gas inlet conditions
Permissible sample gas pressure 800 to 1200hPa absolute (with external reference gas supply),
atmospheric pressure (with built-in pump)
Sample gas 󹪞ow 18 to 60 l/h (0.3 to 1 l/min)
Technical speci󹪝cations
7.4Technical speci󹪝cations OXYMAT 6E, OXYMAT channel in OXYMAT/ULTRAMAT 6E and OXYMAT 61
Series 6 and ULTRAMAT 23
56 Compact Operating Instructions, 01/2024, A5E45779144002-AB