To Next PageTo Next Page
Need help?Do you have a question about the Siemens ULTRAMAT 23 Series and is the answer not in the manual?
General| Weight | Approx. 15 kg |
|---|---|
| Measurement Principle | NDIR and electrochemical |
| Gases Measured | CO, CO2, NO, SO2, CH4, O2 |
| Number of Measured Components | Up to 3 components simultaneously |
| Oxygen Measurement | Electrochemical sensor |
| Accuracy | ±1% of full scale |
| Operating Temperature | +5 to +45 °C |
| Power Supply | 100-240 V AC, 50-60 Hz |
| Output Signal | 4 to 20 mA |
Covers general safety, security information, and guidelines for industrial applications.
Explains the functions, including infrared, ultraviolet, and oxygen measurement principles.
Provides detailed technical specifications for various components and the overall system.
General safety guidelines and warnings related to device condensation and wetted parts.
Instructions for connecting signal lines and power supply, including safety precautions.
Information on accessing diagnostic parameters, status messages, and logbooks.
Guides for calibrating IR, O2, H2S, and UV components, including AUTOCAL.
Details on adjusting parameters like measuring ranges, limits, time constants, and device configuration.
Covers device cleaning, gas path maintenance, and replacement of parts like filters and modules.
Details on analyzer messages indicating maintenance needs, such as AUTOCAL drift or sensor status.
Lists common faults, their possible causes, and recommended remedies for measurement issues.
