1.7 Warranty conditions
We expressly point out that the product quality is exclusively and conclusively described in the
sales contract. The content of this product documentation is neither a part of a previous or
existing agreement, promise or legal relationship, nor is it intended to modify these. All
obligations on the part of Siemens AG are contained in the respective sales contract, which also
contains the complete and solely applicable liability provisions. The provisions dened in the
sales contract for the responsibility for defects are neither extended nor limited by the remarks
in this document.
1.8 Delivery information
The respective scope of delivery is listed on the shipping documents in accordance with the valid
sales contract. These are enclosed with the delivery.
When opening the packaging, please observe the corresponding information on the packaging
material. Check the delivery for completeness and undamaged condition. In particular, the
Order No. on the labels, if present, must be compared with the ordering data.
If possible, please keep the packaging material since you can reuse it for return deliveries if
necessary.
1.9 Standards and regulations
As far as possible, the harmonized European standards were the basis for the specication and
production of this device. If no harmonized European standards have been applied, the
standards and regulations for the Federal Republic of Germany are valid.
When this product is used beyond the scope of these standards and regulations, the valid
standards and regulations of the country of the operating company apply.
1.10 Conformity with European directives
The CE mark on the device is a sign of conformity with the following European directives:
Directive for electro‐
magnetic compatibility
(EMC)
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL on the harmonization of the laws of the Member States
relating to electromagnetic compatibility.
Explosion protection
directive
ATEX
DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL on the harmonization of the laws of the Member States
relating to equipment and protective systems intended for use in po‐
tentially explosive atmospheres.
Low voltage directive
LVD
DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL on the harmonization of the laws of the Member States
relating to the making available on the market of electrical equipment
designed for use within certain voltage limits.
The directives applied can be found in the EU declaration of conformity for the associated device.
Introduction
1.10 Conformity with European directives
ULTRAMAT 23
12 Equipment Manual, 04/2022, A5E37100388-012
To Next Page
Loading...
