Siemens ULTRAMAT 23 Series - Information on Industrial Use

2.1.2 Information on industrial use
NOTICE
Use in home environment
This Class A Group 1 device according to CISPR 11 is intended for industrial use.
If used in homes, the device may cause radio interference.
NOTICE
Insu󹪟cient protection during storage
The packaging only provides limited protection against moisture and in󹪝ltration.
• Provide additional packaging as necessary.
WARNING
Incorrect disassembly
The following risks may result from incorrect disassembly:
- Injury through electric shock
- Risk through emerging media when connected to the process
- Risk of explosion in hazardous area
In order to disassemble correctly, observe the following:
• Before starting work, make sure that you have switched o󹪜 all physical variables such as
pressure, temperature, electricity etc. or that they have a harmless value.
• If the device contains hazardous media, it must be emptied prior to disassembly. Make sure
that no environmentally hazardous media are released.
• Secure the remaining connections so that no damage can result if the process is started
unintentionally.
Safety instructions
2.1 General
ULTRAMAT 23
16 Equipment Manual, 04/2022, A5E37100388-012