Siemens 6ES7153-2BA10-0XB0 User Manual

ET 200M
SIMATIC
Distributed I/O device
ET
200M
Operating Instructions
04/2022
EWA
-4NEB7806006-09
Preface
Product overview
1
Brief instructions on
commissioning
2
Assignment planning
3
Installation
4
Connecting
5
Commissioning
6
Maintenance and service
7
Functions
8
Interrupt, error and system
messages
9
Technical Specifications
10
Compatibilities between
the IM 153-x
A
Order Numbers for the ET
200M
B

Siemens 6ES7153-2BA10-0XB0 Specifications

General

Brand	Siemens
Model	6ES7153-2BA10-0XB0
Category	Industrial Equipment
Language	English

Summary

Brief instructions on commissioning

2.1 Commissioning on PROFIBUS DP

Step-by-step guide for commissioning the ET 200M on PROFIBUS DP.

Assignment planning

3.1 Structure variants for PROFIBUS DP

3.3 Configuration possibilities for PROFIBUS DP

3.5 Configuring the mechanical structure

3.6 Configuring the electrical structure

Installation

4.2 Installation

Details mounting sequence, installing DIN rail, modules, and active bus modules.

4.3 Setting the PROFIBUS address

Connecting

5.2 Connecting PROFIBUS DP

Covers connecting bus connectors and fiber-optic cables for PROFIBUS DP.

5.3 Connecting PROFINET IO

Details connecting supply voltage and PROFINET IO to the IM 153-4 PN.

5.4 Wiring the power supply and modules

Provides wiring rules for power supply, IM 153-x, and front connectors.

Commissioning

6.1 PROFIBUS DP

Covers software requirements and steps for commissioning the DP slave.

6.2 PROFINET IO

Explains configuration using STEP 7, GSD files, and assigning device names.

Maintenance and service

7.2 Replacing the Power Supply Module

7.4 Replacing the IM 153-2 or IM 153-2 FO

Explains removing and installing IM 153-2/2 FO modules, including redundant systems.

7.7 Replace modules with the function "Change During Operation"

Explains the procedure for replacing modules while the ET 200M is operating.

7.10 Updating the IM 153-x

Functions

8.2 Time stamping the input signals with IM 153-2

Details time stamping capabilities, parameters, and configurations for input signals.

8.4 Redundancy with IM 153-2

Covers redundant operation of IM 153-2 on SIMATIC S7-400H and other systems.

8.5 System modification during operation

8.6 Isochrone mode

Interrupt, error and system messages

9.1 PROFIBUS DP

Details diagnostics with LED display, slave diagnosis, and station statuses for PROFIBUS DP.

9.2 PROFINET IO

Explains diagnostics using LED display, error types, and configuration states for PROFINET IO.

Technical Specifications

10.1 Standards and approvals

10.2 Parameters of the IM 153-x

10.3 Technical specifications of the IM 153-x

10.4 Technical specifications of the IM 153-4 PN interface module

10.5 Response time of the ET 200M