Functions
8.2 Time stamping the input signals with IM 153-2
ET 200M
156 Operating Instructions, 04/2022, EWA-4NEB7806006-09
8.2.4.9 Diagnosis for time stamping
You can obtain information on the status of the time stamping by reading the data record
240 from the IM 153-2 interface module. You read via DS_READ-240.
Structure of the data record 240 for the diagnosis
The diagnosis data in the data record 240 for diagnosing the time stamp is made up of 80
bytes is structured as follows:
Figure 8-17 Structure of the data record 240 for the diagnosis (part 1)
To Next Page
Loading...
