Siemens 6ES7515-2AN03-0AB0 - Front View of the CPU Without Front Panel or Display and View from below

3.5.2 Front view of the CPU without front panel or display and view from below
The following figure shows the operator controls and connection elements of the
CPU1515‑2PN.







① LEDs for the current operating mode and diagnostic status of the CPU
② Connector for the display
③ Arrow keys
④ LED displays for the PROFINET interface
⑤ STOP and RUN operating mode buttons
⑥ STOP-ACTIVE LED
⑦ Connector for the supply voltage
Figure 3-4View of the CPU1515‑2PN (without front panel or display) - front
NOTE
Removing the display
Only remove the display if it is faulty.
You can find information on removing and replacing displays in the S7-1500, ET 200MP
system manual (http://support.automation.siemens.com/WW/view/en/59191792).
27
Product overview
3.5 Operating and display elements
CPU 1515-2 PN (6ES7515-2AN03-0AB0)
Equipment Manual, 11/2022, A5E46416198-AC