Article number 6ES7515-2AN03-0AB0
•
Media redundancy No
PROFINET IO Controller
Services
–
PG/OP communication Yes
–
Isochronous mode No
–
Direct data exchange No
–
IRT No
–
PROFIenergy Yes; per user program
–
Prioritized startup No
–
Number of connectable IO Devices,
max.
32; In total, up to 1 000 distributed I/O devices
can be connected via AS-i, PROFIBUS or PROFINET
–
Number of connectable IO Devices for
RT, max.
32
–
of which in line, max. 32
–
Number of IO Devices that can be sim
ultaneously activated/deactivated,
max.
8; in total across all interfaces
–
Number of IO Devices per tool, max. 8
–
Updating times The minimum value of the update time also
depends on communication share set for
PROFINET IO, on the number of IO devices, and
on the quantity of configured user data
Update time for RT
–
for send cycle of 1 ms 1 ms to 512 ms
PROFINET IO Device
Services
–
PG/OP communication Yes
–
Isochronous mode No
–
IRT No
–
PROFIenergy Yes; per user program
–
Prioritized startup No
–
Shared device Yes
–
Number of IO Controllers with shared
device, max.
4
–
activation/deactivation of I-devices Yes; per user program
–
Asset management record Yes; per user program
Interface types
RJ 45 (Ethernet)
•
100 Mbps Yes
•
Autonegotiation Yes
•
Autocrossing Yes
44
CPU 1515-2 PN (6ES7515-2AN03-0AB0)
Equipment Manual, 11/2022, A5E46416198-AC
Technical specifications
To Next Page
Loading...
