To Next PageTo Next Page
Need help?Do you have a question about the Siemens 6SE7022-1EC85-1AA0 and is the answer not in the manual?
Details mains and DC link connections, including size-specific diagrams and terminal assignments.
Explains connections for the 24 V DC power supply and the main contactor control circuit.
Covers connections for control leads, ESD precautions, and available interfaces for control.
Explains how to connect multiple units in parallel to increase output current and lists compatible order numbers.
Describes the hardware requirements and configurations for 12-pulse operation to reduce harmonic loading.
Details the preparatory measures and procedures for the initial start-up of the unit.
Explains process data, control/status words, setpoints, and actual values used during start-up.
Outlines the procedures for starting up optional boards like CAN bus or PROFIBUS.
Details parameters related to the drive's rated voltage, frequency, current, and load class.
Explains the function of each control element on the Parameterization Unit (PMU).
Lists fault codes, descriptions, values, meanings, and possible causes/countermeasures.
Details alarm messages, their parameters, descriptions, and required countermeasures.
Provides step-by-step instructions for replacing the fan unit for different sizes (C, E, H, K).
Details the procedure for replacing electronic modules in the electronics box, including ESD precautions.
Describes the disassembly and replacement process for thyristor blocks in size H and K units.
Introduces the DriveMonitor software tool for PC-based commissioning, parameterizing, and diagnosing.
General