To Next PageTo Next Page
Need help?Do you have a question about the Siemens 6SE7041-3HK85-1AA0 and is the answer not in the manual?
Illustrates mains and DC link power connections for different unit sizes (C, E, H, K).
Details the connection of the 24 V DC power supply and main contactor control circuit.
Explains connections for control terminal blocks and serial interfaces like RS485.
Detailed circuit diagrams of the power sections for different unit sizes.
Outlines preparatory measures and the initial start-up procedure.
Covers parameters for language, access level, function selection, and drive settings.
Provides technical data for drive configuration, including rated voltages and currents.
Parameters for configuring installed hardware options.
Details parameters related to the DC link, such as resistance and inductance.
Parameters for controlling the unit, including current and voltage regulation gains.
Parameters for selecting setpoint sources and handling deviations.
Parameters for defining sources of control commands and destinations for status signals.
Parameters for configuring serial interfaces like SST1, SST2, SCB, CB, and TB.
Explains the function of each button on the PMU for controlling the unit.
Lists fault numbers, their descriptions, possible causes, and countermeasures.
Lists alarm numbers, their descriptions, and necessary countermeasures.
General