Siemens 6SE7041-0EH85-1AA0 User Manual

s
SIMOVERT Master Drives
Rectifier/Regenerating Unit
Sizes C to K
Operating Instructions
Edition: i Order No.: 6SE7087-6AK85-1AA0
https://www.aotewell.com
AoteWell Automation Sales Team
Sales@aotewell.com
AoteWell LTD
Buy Siemens PLC HMI Drives at AoteWell.com
https://www.aotewell.com

Siemens 6SE7041-0EH85-1AA0 Specifications

General

Brand	Siemens
Model	6SE7041-0EH85-1AA0
Category	DC Drives
Language	English

Summary

0 Definitions

DANGER

Indicates an imminently hazardous situation leading to death or serious injury.

WARNING

Indicates a potentially hazardous situation that could result in death or serious injury.

1 Description

1.1 Application

Describes the intended use of the rectifier/regenerating units.

1.2 Principle of operation

Explains how the rectifier/regenerating unit functions.

3 Connection

3.1 Power connections

Details electrical connections for power supply.

3.2 Power supply and main contactor

Covers power supply and main contactor circuit connections.

3.3 Control terminal block and serial interface

Explains connections for control signals and serial interfaces.

3.6 Power sections

Details the electrical schematics of the power sections.

3.7 Parallel connection of parallel unit(s), size K

Explains how to connect multiple units in parallel.

3.8 12-pulse mode (only possible with the optional RS485 interface)

Describes the 12-pulse operation mode and requirements.

4 Start-Up

4.1.2 General explanation of the terminology and functional scope of the rectifier/regenerating unit

Defines key terms and unit functions.

4.2 Initial start-up

Steps for the first-time setup of the unit.

4.2.2 Parameterization "Standard application"

Guide for standard parameter settings.

4.2.3 Parameterization for "Expert application"

Guide for advanced parameter settings.

5 Parameter list

5.3 General parameters

Lists fundamental parameters for unit configuration.

5.4 Drive data

Parameters related to the drive's characteristics.

5.5 Hardware configuration

5.6 Data of the DC link

5.7 Control

5.9 Setpoint channel

5.10 Control and status word

5.11 Analog input/output

5.12 Communications

5.13 Diagnostics

5.15 Factory parameters

6 Operator control

6.1 Operator control elements

Description of buttons and controls on the PMU.

7 Fault and Alarm Messages

7.1 Fault messages

Details of fault codes and their meanings.

7.2 Alarm messages

8 Maintenance

8.1 Maintenance recommendations

8.2 Replacing components

Procedures for replacing parts.

8.2.1 Replacing the fan

8.2.2 Replacing modules

8.2.3 Replacing thyristor modules with sizes C and E

8.2.5 Replacing thyristor blocks

9 Options

9.4 Operator control panel OP1S

9.6 RS485 interface (PTP1)

9.7 DriveMonitor

Information about the DriveMonitor software tool.