05.00  Logbook 
Siemens AG    6SE7087-6AK85-1AA0 
12-9 
Rectifier/Regenerating Unit    Operating Instructions 
Par-
No. 
Parameter 
designation 
Factory setting  Start-up setting  Start-up setting 
change 
P706  CB Parameter 11  i001=0 
i002=0 
i003=0 
i004=0 
i005=0 
i001= 
i002= 
i003= 
i004= 
i005= 
i001= 
i002= 
i003= 
i004= 
i005= 
r720 Software version  0     
P772 Thyr.vlt.corr 
 
(only visible if 
P051=3, P799=4) 
i001=0 
i002=0 
i003=0 
i004=0 
i005=0 
i006=0 
i001= 
i002= 
i003= 
i004= 
i005= 
i006= 
i001= 
i002= 
i003= 
i004= 
i005= 
i006= 
P773 Deadband Convert  i001=0.01 
i002=0.01 
i003=0.01 
i004=0.01 
i001= 
i002= 
i003= 
i004= 
i001= 
i002= 
i003= 
i004= 
P774 Deadband Invert  i001=-3.00 
i002=-3.00 
i003=-3.00 
i004=-3.00 
i001= 
i002= 
i003= 
i004= 
i001= 
i002= 
i003= 
i004= 
P775  Min Gating Angle  i001=0 
i002=0 
i003=0 
i004=0 
i001= 
i002= 
i003= 
i004= 
i001= 
i002= 
i003= 
i004= 
P776  Max Gating Angle  i001=150 
i002=150 
i003=150 
i004=150 
i001= 
i002= 
i003= 
i004= 
i001= 
i002= 
i003= 
i004= 
P777  Max Gating Angle 
Ramp 
i001=20.00 
i002=20.00 
i003=20.00 
i004=20.00 
i001= 
i002= 
i003= 
i004= 
i001= 
i002= 
i003= 
i004= 
P785 I
2
t Control Word  1     
P793  Line Voltage Delay  0.03     
P799 Spezial Access  0     
P917 Change Reports  0     
P918  CB Bus Address  3     
P927 Parameter Access  6     
P928 Src Base/Reserve  1005     
P952  # of Faults  0     
P970 Factory Settings  1     
P971 EEPROM Storing  0     
 
AoteWell Automation Sales Team
Buy Siemens PLC HMI Drives at AoteWell.com